Aeromotive 11115 - ATOMIC BELT DRIVE FUEL PUMP User Manual download pdf

AEROMOTIVE Part # 11115

INSTALLATION INSTRUCTIONS

Not For Street Use!

CAUTION:

Installation of this product requires detailed knowledge of automotive systems and repair procedures. We

recommend that this installation be carried out by a qualified automotive technician.

Installation of this product requires handling of gasoline. Ensure you are working in a well ventilated area

with an approved fire extinguisher nearby. Extinguish all open flames, prohibit smoking and eliminate all sources

of ignition in the area of the vehicle before proceeding with the installation.

When installing this product, wear eye goggles and other safety apparel as needed to protect yourself

from debris and sprayed gasoline.

WARNING!

The fuel system is under pressure. Do not open the fuel system until the pressure has been relieved.

Refer to the appropriate vehicle service manual for the procedure and precautions for relieving the fuel system

pressure.

The enclosed Aeromotive fuel pump utilizes an o-ring sealed AN-12 style outlet ports; this port is NOT PIPE THREAD

and utilizes NO THREAD SEALANT.

To use this pump in your vehicle’s fuel system, we strongly recommend the following

Gravity feed the pump by mounting it lower than the fuel cell.

Utilize high pressure fuel lines, fittings and o-rings for all connections from the

fuel cell to the engine.

Failure to follow the above recommendations may result in fuel leakage, bursting of the fuel lines, poor vehicle

performance and/or decreased fuel pump life! Improper installation will void all warranties for this product!

Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.

Performance Specifications: Model 11115

Fuel Compatibility Gasoline & Methyl Alcohol

Port Sizes 1 ¼” Inlet & AN-12 Outlet

Pump mounting:

Pump should be mounted as low as possible to ease priming.

Due to the large number of applications, no specific mounting instructions are provided.

Pump should turn at half the engine speed.

Recommend a 28-tooth pulley on the pump and a 14-tooth pulley on the crankshaft.

Call for details on Aeromotive mounting kits.

1 2 3 4

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

AEROMOTIVE Part # 11115 INSTALLATION INSTRUCTIONS Not For Street Use! CAUTION: Installation of this product requires detailed knowledge of automo

Page 2

The following steps are typical of most installations: 1. Once the engine has been allowed to cool, relieve the fuel system pressure and disconnect

Page 3 - AEROMOTIVE, INC

Thanks for purchasing another quality product designed, engineered and manufactured in Kansas City, USA! AEROMOTIVE, INC. 7805 Barton Street, Lenexa,

Page 4

Aeromotive, Inc. 7805 Barton Street, Lenexa, KS 66214 Phone: (913) 647-7300 Fax: (913) 647-7207 AEROMOTIVE, INC. LIMITED WARRANTY This Aeromotive

Comments to this Manuals

No comments

Aeromotive 11115 - ATOMIC BELT DRIVE FUEL PUMP User Manual

Browse online or download User Manual for Pumps Aeromotive 11115 - ATOMIC BELT DRIVE FUEL PUMP. Aeromotive 11115 - ATOMIC BELT DRIVE FUEL PUMP User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Pumps Aeromotive 11115 - ATOMIC BELT DRIVE FUEL PUMP